Morana Products

Misc. Morana Exclusives
Items for SALE
TOLL FREE LINE
2.6L Products
2.8L Products
2.9L Products
3.0L Products
3.7L Products
3.8L Stroker Kits
3.9 Products
4.0L Products
4.2L Products
4.6 Products
5.0L Products
Heads
Cylinder Head Gaskets
ARP Fasteners
Screw in Studs
Roller Rockers
Guide Plates
Performance Camshafts
High Volume Oil Pump
New Heavier Springs
Roller Lifters
Longer Hardened Pushrods
Larger Stainless Steel Valves
Connecting Rods
Pistons
3.8 intakes
Supercoupe Twin Throttle Body
Reproduction Supercharger
Stud Girdle
Double Roller Chain
Windage Tray
Exhaust
Crankshafts
Throttle Body Supercharger
Throttle body spacer
Throttle Body
Distributor
Custom Aluminum Fuel Rails
Alternater/Water Pump Kit
Phenolic Intake Spacer
Single Port Phenolic Spacer

1.8:1 Roller Rockers

1.8:1 Roller Rockers

1.8:1 Roller Rockers
Application: 2.6 L V6 FORD  engines

Finally....roller rockers for the 2.6L enthusiasts!

Our roller rockers are available in bolt-on/adjustable or 3/8 screw in studs (which are fully adjustable). Available in solid or hydraulic lifters.

What makes these roller rockers unique is the exclusive Morana designed lifters and pushrods.

If you're intending on doing head work (or rebuilding your engine) the Morana exclusively designed lifters are the better choice, to keep the rockers lubricated, by channeling the oil through the push rod, to the rockers.

Your original rockers are 1.5:1 ratio, plus they are not roller. By installing 1.8:1 roller rockers...you'll be gaining over 80 thou lift, at the valve (not changing the duration at all) which will increase the air flow ratio coming into the engine (much as a cam does) but without the added expensive of upgrading your camshaft, upgrading your chip, and costly shop rates, as many can install these themselves.

Your lower intake manifold gasket may need to be cut on the line where the pushrods go by, in order for them to clear.

This kit includes- 12 roller rockers, pedestals &, bolts, 2 rocker mounting bars with hardware, 12 hardened Morana pushrods, 12 special Morana lifters.

You can expect 20 hp. and 25-30 lbs. torque  

**Also available 1.6:1  1.7:1 roller rockers


PRICE: $1 250.00

Heavy Duty Head Bolts

Heavy Duty Head Bolts

Heavy Duty Head Bolts
Application: 2.6L V6 OHV

These heavy duty replacement HEAD BOLTS are made of 12.9 grade high strength steel. Unlike the stock bolts...they are reusable like head studs (without the head stud price).
These bolts are suitable for street/strip, supercharge/turbo/nitro use. For extreme rpm's and boost...I'd suggest our ARP Head STUDS.
PRICE: $140.00

Heavy Duty Head Bolts

Heavy Duty Head Bolts

Heavy Duty Head Bolts
Application: 2.6L V6 OHV

These heavy duty replacement HEAD BOLTS are made of 12.9 grade high strength steel. Unlike the stock bolts...they are reusable like head studs (without the head stud price).
These bolts are suitable for street/strip, supercharge/turbo/nitro use. For extreme rpm's and boost...I'd suggest our ARP Head STUDS.
PRICE: $120.00

Heavy Duty Main Cap Bolts

Heavy Duty Main Cap Bolts

Heavy Duty Main Cap Bolts
Application: 2.6L V6 OHV engines

These heavy duty replacement main cap bolts are made of 10.9 grade high strength steel and are reusable (without the high price of main studs). They are best for every day use but are suitable for street/strip, supercharge/turbo/nitro use. For extreme rpm's and boost...I'd suggest our ARP MAIN STUDS.
PRICE: $75.00

Valve Cover Support Rails

Valve Cover Support Rails

Valve Cover Support Rails
Application: Fits ANY 2.6L stock original valve covers

To solve the squashing/leaking problems that the 2.6L valve covers are known for when you clamp them down.  Our new support rails provide even pressure around the entire valve cover, so that when you bolt them on...you'll get an even much better seal, prevent leakage into the engine bay and smoking. Life time warranted!

Now anodized to keep your rails from rusting
Made of 1/4" steel.

Optional: Superior valve cover gaskets to really clamp the seal! (Please add $80.)

Priced per pair
PRICE: $175.00

Valve Cover Gaskets

Valve Cover Gaskets

Valve Cover Gaskets
Our premium valve cover gaskets, together with our valve cover support rails will put an end to your smokey, smelling, costly valve cover leaks for good!
PRICE: $95.00

Forged Pistons

Forged Pistons

Forged Pistons
Application: 2.6 V6 Ford


Matching performance piston rings
$150.
PRICE: $1 400.00

Click here for Disclaimer  

Click here for Return Policy  



We accept:

Direct bank deposit
US Money Order

Designed & Hosted By OneCore Media